Har kämpat från morgonen med att försöka få ingång srv8. Nu ger jag upp.
Jag kommer att återställa era sidor från dom backuper jag har, vet ej hur nya…
Men jag har även tillgång till filer från srv8… så om det fattas något kan jag återställa… men det kommer efter att jag gjor möjligt för alla att använda mailen.
Om ni undrar hur det ser ut när man försöker rädda server:
Filesystem Size Used Avail Use% Mounted on
/dev/sda6 57G 18G 37G 33% /
/dev/sda2 251M 29M 210M 12% /boot
/dev/sda3 50G 6.9G 41G 15% /var
/dev/sda5 10G 215M 9.3G 3% /tmp
/dev/sdb1 1.4T 592G 715G 46% /home
Disk /dev/sda: 3000.0 GB (=> 2861 GIB)
Disk /dev/sdb: 128.0 GB (=> 122 GIB)
Disk /dev/sdc: 1500.3 GB (=> 1430 GIB)
RAID 3ware 9650SE SATA-II RAID PCIe
Disk /dev/sda: 3000.0 GB (=> 2861 GIB)
Disk /dev/sdb: 120.0 GB (=> 114 GIB)
Disk /dev/sdc: 1500.3 GB (=> 1430 GIB)
RAID 3ware 9650SE SATA-II RAID PCIe
dd if=/dev/sda of=/home/bu/sda3.img
dd if=/sdc/bu/sda3.img of=/dev/sdb
mount /dev/sdb6 /sdb
mount -t ext2 /home/bu/sda3.img /mnt/image -o loop
mount -t ext2 /sdc/bu/sda3.img /ssd -o loop
fdisk -lu /sdc/bu/sda3.img
sfdisk -l -uS
mount /dev/sdb1 /sdb1
root@rescue /sdc/bu # mkdir /sdb1 …. boot
root@rescue /sdc/bu # mkdir /sdb2 …. var
root@rescue /sdc/bu # mkdir /sdb3 … tmp
root@rescue /sdc/bu # mkdir /sdb6 … /
2155023360
mount -o loop,offset=2155023360 -t ext4 /sdc/bu/sda3.img /ssd/2
mount -o loop,offset=2426457600 -t ext4 /sdc/bu/sda3.img /ssd/3
mount -o loop,offset=56121085952 -t ext4 /sdc/bu/sda3.img /ssd/5
mount -o loop,offset=66863301632 -t ext4 /sdc/bu/sda3.img /ssd/6
fdisk -lu sda3.img
cp –preserve -r /ssd /sda/ssd (sista ssd/ssd)
cp –preserve -fr /sda/ssd/2/ /sdb2
try cp -fr (overwrite all)
cp –preserve -fr /sda/ssd/ssd/2/* /sdb1 /dev/sdb1 485M 28M 432M 7% /boot
/dev/sdb3 9.7G 150M 9.0G 2% /tmp
cp –preserve -fr /sda/ssd/ssd/3/* /sdb2 /dev/sdb2 49G 224M 46G 1% /var
cp –preserve -fr /sda/ssd/ssd/6/* /sdb6 /dev/sdb6 49G 705M 45G 2% /
Disk /dev/sda: 3000.0 GB (=> 2861 GIB)
Disk /dev/sdb: 120.0 GB (=> 114 GIB)
Disk /dev/sdc: 1500.3 GB (=> 1430 GIB)
/dev/sda1 2.7T 23G 2.6T 1% /sda
/dev/sdc1 1.4T 819G 487G 63% /sdc
Device Boot Start End Blocks Id System
sda3.img1 3906 4209029 2102562 82 Linux swap / Solaris
sda3.img2 4209030 4739174 265072+ 83 Linux
sda3.img3 4739175 109611494 52436160 83 Linux
Partition 3 has different physical/logical endings:
phys=(1023, 254, 63) logical=(6822, 254, 63)
sda3.img4 109611495 250067789 70228147+ 85 Linux extended
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(1023, 254, 63) logical=(6823, 0, 1)
Partition 4 has different physical/logical endings:
phys=(1023, 254, 63) logical=(15565, 254, 63)
sda3.img5 109611496 130592384 10490444+ 83 Linux
sda3.img6 130592386 250067789 59737702 83 Linux
sector size * start= 512 * 3906 = 1999872
losetup -o 1999872 /dev/loop0 /sdc/bu/sda3.img
mkdir /sdc
mount /dev/sdc1 /sdc
losetup -o 1999872 /dev/loop0 /sdc/bu/sda3.img
mkdir /ssd
mount /dev/loop0 /ssd
mount /dev/sda1 /sda
Disk /dev/sda: 3000.0 GB, 2999978033152 bytes
255 heads, 63 sectors/track, 364726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0×00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 267350 2147483647+ ee GPT
Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000af14c
mount /dev/sdc1 /sdc
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 64 512000 83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sdb2 64 6438 51200000 83 Linux
/dev/sdb3 6438 7713 10240000 83 Linux
/dev/sdb4 7713 14594 55267328 5 Extended
/dev/sdb5 7713 8223 4096000 82 Linux swap / Solaris
/dev/sdb6 8223 14594 51169280 83 Linux
Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0×00000000
mount /dev/sdc1 /sdc
Device Boot Start End Blocks Id System
/dev/sdc1 1 182401 1465136001 83 Linux
proc /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
/dev/sdb5 none swap sw 0 0
/dev/sdb1 /boot ext4 defaults 0 0
/dev/sdb2 /var ext4 defaults 0 0
/dev/sdb3 /tmp ext4 noexec,nosuid 0 0
/dev/sdb6 / ext4 defaults,usrquota,grpquota 0 0
/dev/sdc1 /home ext3 defaults,usrquota,grpquota 0 0
format as ext3
6jqX2Eyc
mkfs.ext2 /dev/sdb1
cp –preserve -fr /sda/ssd/ssd/2/* /sdb1 /dev/sdb1 485M 28M 432M 7% /boot
cp –preserve -r /sdb1 /sda/ssd/
cp –preserve -r /sda/ssd/sdb1/* /sdb1
proc /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
/dev/sdb5 none swap sw 0 0
/dev/sdb1 /boot ext2 defaults 0 0
/dev/sdb2 /var ext4 defaults 0 0
/dev/sdb3 /tmp ext4 noexec,nosuid 0 0
/dev/sdb6 / ext4 defaults,usrquota,grpquota 0 0
/dev/sdc1 /home ext3 defaults,usrquota,grpquota 0 0
……………………………
proc /proc proc defaults 0 0
none /dev/pts devpts gid=5,mode=620 0 0
/dev/sdb5 none swap sw 0 0
/dev/sdb1 /boot ext3 defaults 0 0
/dev/sdb2 /var ext4 defaults 0 0
/dev/sdb3 /tmp ext4 noexec,nosuid 0 0
/dev/sdb6 / ext4 defaults,usrquota,grpquota 0 0
/dev/sdc1 /home ext3 defaults,usrquota,grpquota 0 0
/dev/sda1 /home2 ext4 defaults,usrquota,grpquota 0 0
#
# /etc/fstab
# Created by anaconda on Tue Jan 3 15:46:04 2012
#
# Accessible filesystems, by reference, are maintained under ‘/dev/disk’
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=c4ecf424-a0aa-4e9c-9b79-d3fcd06edb63 / ext4 defaults 1 1
UUID=e7301203-d964-4e27-9250-1c1f50f46608 /boot ext3 defaults 1 2
UUID=05ac26fd-e232-4d88-b778-89883939298e /tmp ext4 defaults 1 2
UUID=dfe1de8a-24d5-4379-bd96-193160f68c0f /var ext3 defaults 1 2
UUID=5a85b84d-85b6-44d5-8797-57e90f421ca5 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
cp –preserve -fr /sda/ssd/ssd/2/* /sdb1 /dev/sdb1 485M 28M 432M 7% /boot
/dev/sdb3 9.7G 150M 9.0G 2% /tmp
cp –preserve -r /sda/ssd/ssd/3/* /sdb2 /dev/sdb2 49G 224M 46G 1% /var
cp –preserve -fr /sda/ssd/ssd/6/* /sdb6 /dev/sdb6 49G 705M 45G 2% /
#
# /etc/fstab
# Created by anaconda on Tue Jan 3 15:46:04 2012
#
# Accessible filesystems, by reference, are maintained under ‘/dev/disk’
# See man pages fstab(5), findfs(8), mount(8) and/or blkid(8) for more info
#
UUID=c4ecf424-a0aa-4e9c-9b79-d3fcd06edb63 / ext4 defaults,usrquota,grpquota 1 1
UUID=e7301203-d964-4e27-9250-1c1f50f46608 /boot ext3 defaults 1 2
UUID=05ac26fd-e232-4d88-b778-89883939298e /tmp ext4 defaults 1 2
UUID=dfe1de8a-24d5-4379-bd96-193160f68c0f /var ext3 defaults 1 2
UUID=5a85b84d-85b6-44d5-8797-57e90f421ca5 swap swap defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
sysfs /sys sysfs defaults 0 0
proc /proc proc defaults 0 0
/dev/sdc1 /home ext3 defaults,usrquota,grpquota 0 0
/dev/sda1 /home2 ext4 defaults 0 0
boot 
cp –preserve -r /sdb1/* /sda/ssd/sdb1New/
cp –preserve -r /sda/ssd/sdb1/* /sdb1/
****
Synd att jag inte gav upp direkt…. men något har man lärt sig.
